Gen2 Performance Series Picatinny Rail
The Tikka Performance Center is excited to offer our Performance Series picatinny rails for the Tikka T3 available in both 0 and 20 MOA.
The primary advantage of the Performance Series picatinny rail system is our proprietary utilization of Tikka's recoil recess in the action. This recoil lug absorbs the shearing forces of the mount under recoil instead of the four tiny screws included in most other mounting systems.
These rails are full, MIL-STD 1913 spec rails machined to an amazing +/- .002" tolerance. Machined from one piece of 6061 aluminum and MIL-STD Type 3 anodizing, these rails will give you a lifetime of service. Type 3 anodizing creates a hardened coating with a Rockwell Hardness value between 60 and 70. (Click here to learn more about MIL-STD Type 3 Anodizing)
Unlike standard Weaver style rail mounts with limited contact with the scope rings, our full picatinny rails make contact with the scope rings over the entire width of the mount. This eliminates potential damage that can occur under heavy recoil (see picture of a T3 Standard Rail damaged by the recoil of a .270).
The Tikka Performance Center Performance Series rails for the Tikka T3 are the finest aluminum Tikka T3 mounts you will find anywhere.